Hydraulic breaker and rock hammer works correctly

Hydraulic breaker and rock hammer works correctly

1. Proper breakdown force

For effective crushing, the hydraulic breaker  applies the appropriate breakdown force. If the breakdown force is insufficient, then the piston hammer energy will not be effective gravel; In this way, the counterforce of hammer force will be transmitted to the rock breaker  body and the big arm of the excavator/loader, thus damaging these parts.

Excavator/loader, on the other hand, the big arm lifting cases, if the puncture force is too large and, when broken, the machine may be in the gravel suddenly tilted, hammer, hammer hit so hard stone can cause damage of broken hammer, combat operations, under the condition of vibration will also spread to wheel excavator crawler, should avoid in such conditions.

So during the strike operation, always pay attention to the breakdown force of the hammer, do not work when the breakdown force is not appropriate.

2. Breakdown direction of the rock breaker

The breakdown direction should be in a straight line with the hydraulic breaker  chisel. When the hydraulic breaker chisekl breaks the rock, it should be operated in the vertical direction. If the hammer stroke direction is inclined, the hydraulic breaker chisel  may slip during the hammer stroke, causing the rock breaker chisel and piston to break or get stuck. So when the crushing operation, should choose a good breakdown point, so that the hammer hammer operation can ensure the stability of hammer.